SS Casing Air Cooling Low Temperature Evaporator For Fruits /
1. Cold Room Cold storage Evaporator Features
1) the casing adopted rolled aluminum plate and paint epoxy plastic
anti-erode, nice shape. special design coil position. efficiently
heat exchange. the aluminum fins are fitted on the copper tube by
2) all the cable have connected to a terminal box in factory, easy
3) low noise fan-motor, stably running
4) there is a drain water connection on the centre of drain plate,
easy to drain water
5) suspend bracket, easy to install
6) U stainless steel and aluminum- magnesium filling heater, placed
in centre of the coil, be good for defrost.
2. Cold Room Cold storage Evaporator introduction
1) EST series Air Cooler/Evaporator is a kind of cooling equipments
which used with refrigerant units application for different cold
rooms. It is clasified three category including ESTJS, ESTKS, ESTXS
by different cold room temperature. JS series applied for
0°Cpreservation cold room; KS series applied for about -18°C cold
storage; XS series applied for -25°C frozen storage.
2) Unit cabinet of steel plate with plastic spray, corrosion proof,
and pleasant looking;
3) Mechanically expanded pipes with AL fins with good heat transfer
4) Inside are evenly arranged with defrosting heaters;
5) The bottom has double water receiver, effective for
6) Long distance air throw is optional.
7) External rotor fan for low temperature, with low noise, high
efficiency, and reliability.
1) The cooler can be fixed on the ceiling with 4, 8, or 10 long
2) The space between the unit and wall must be ≥400mm (see the
diagram). It is necessary for air circulation and maintenance.
3) The unit must be level after being fixed.
4) A slope on the drainage pipe from the cooler to the outside is
needed for the condensed Water goes to outside smoothly. A U shape
is needed at the outside on the drainage pipe to keep the hot air
from going inside. (See the diagram)
5) The drainage pipe inside the room need be heat insulated. The
heating line is needed to prevent the condensed water from freezing
in case the cold room temperature is below 0℃.
6) The temperature sensor of the solenoid valve should be fixed on
the level parts of suction pipe, keep touch well with the pipe
surface. The suction pipe should be heat insulated to prevent the
sensor from interfered by the room temperature.
7) The space outside the air outlet of the cooler must not be no
obstacles, to prevent the air blowing be interfered.
4. Detailed Parameter- Cold Room Cold storage Evaporator
|ESTJS Series Air Cooler Technical Parameter(Fin
|Model||Capacity KW||Air Flow||Air throw||Fan Dia.||Fan Qty||Fan Power|
Q: What kind of Technical support Eurostars can provide?
1. Set up customers file, and arrange professional sale engineers
to introduce company products and services to customers in detail.
2. If customers are interested in our products, we will send
professional technicians to survey the installation environment.
3. Make the solution according to different customers'
1. Machine installs and test by qualification engineers.
2. Ensure all the products we provided are qualified and new. The
working life of the main engine is 15 years.
3. Construct and install the heat pump according to national
relevant policies strictly, and ensure high quality delivery on
4. Test and debug the equipments strictly to ensure the safety and
5. During the delivery, provide comprehensive and professional
technical training on instructions and maintenance to customers.
1. We promise to offer free consulting call in 7×24 hours mode to
solve the problems found in practice.
2. Products guarantee is 18~24 months from ex-factory date. Within
18months,if any components of your products damaged because of
quality, we supply new replacement for free.
3. After the expiration of the quality assurance, we will continue
to provide lifelong maintenance services, with just charging some